Spezifikationen
NOIP2SN1300A-QTI is a monochrome global shutter CMOS image sensor belonging to onsemi PYTHON 1300 product series, designed for industrial machine vision, barcode scanning and motion capture systems.
Suffix Explanation
- NOIP2SN1300A: 1.3MP monochrome global shutter sensor with parallel CMOS data output interface
- QTI: JEDEC tray packaging for 48-pin LCC surface mount package
1. Core Optical and Pixel Specifications
- Optical format: 1/2 inch
- Effective pixel array: 1280 horizontal × 1024 vertical, SXGA 1.3 megapixel resolution
- Pixel size: 4.8 μm × 4.8 μm with integrated on-chip microlens
- Adopts full global shutter architecture, supports pipelined exposure and external hardware trigger capture mode
- Integrated correlated double sampling circuit to suppress read noise and improve dynamic range
- Equipped with on-chip programmable gain amplifier and 10-bit analog-to-digital converter
- Maximum frame rate at full resolution: 43 fps
- Up to 8 independent region-of-interest windows can be configured via SPI register to reduce data volume and boost frame rate
- Supports automatic exposure control and programmable black level offset without image distortion during parameter adjustment
2. Power Supply Electrical Parameters
- Dual independent power domains for core circuit and I/O interface
- Analog and digital core supply voltage range: 1.7 V ~ 1.9 V, typical nominal voltage 1.8 V
- I/O power supply voltage range: 3.2 V ~ 3.4 V, typical nominal voltage 3.3 V
- Typical power consumption under standard working status: 420 mW
3. Data Interface and Configuration
- Data output mode: Parallel CMOS interface, different from LVDS output versions of the same series
- Standard 4-wire SPI bus is used to configure exposure time, analog gain, ROI area and other working parameters
- Dedicated synchronization signal pins are reserved for frame signal alignment and backend image data parsing
4. Package and Mechanical Information
- Package type: 48-pin leadless chip carrier (LCC) surface mount device
- Overall package dimension: 14.35 mm × 14.35 mm, maximum thickness 2.55 mm
- Built-in D263 protective glass window with removable anti-scratch protective tape on surface
- Standard shipping specification: 64 pieces per JEDEC tray
- Moisture Sensitivity Level MSL3; reflow soldering must be completed within 168 hours after opening the moisture barrier bag
5. Environmental and Compliance Standards
- Continuous operating ambient temperature range: -40 ℃ ~ +85 ℃
- Lead-free structure, fully compliant with RoHS and REACH environmental regulations
- Robust anti-vibration and anti-shock performance to adapt to complex electromagnetic interference environments on industrial production lines
6. Typical Application Scenarios
Automated production line visual inspection and product defect detection equipment Fixed industrial barcode and QR code reading recognition terminals Traffic monitoring, speed measurement and security real-time snapshot capture devices AGV visual navigation and robotic arm target positioning grabbing systems Portable industrial measuring instruments, optical scientific imaging and particle motion tracking equipment
LXB Semicon supplies original onsemi NOIP2SN1300A-QTI 1.3MP monochrome parallel output global shutter CMOS image sensor
