DSPIC30F6014A-30I/PF

1. Core Architecture & Memory Specifications

1. Core Structure

   Modified Harvard bus architecture with 24-bit instruction width and 16-bit data width, up to 30 MIPS execution speed. Integrated dedicated DSP engine with the following hardware accelerators:

• Single-cycle 17×17 hardware multiply-accumulator (MAC)
• Dual 40-bit saturated accumulators and 40-stage barrel shifter
• Circular addressing and bit-reversal addressing optimized for FFT, digital filtering and signal processing algorithms

2. Memory Allocation

• Program Flash: 144 KB (48K × 24-bit words)
• Data RAM: 8 KB
• On-chip EEPROM: 4 KB (8-bit data width)

3. Stromversorgung

   Wide operating voltage range of 2.5 V to 5.5 V, natively compatible with 5 V industrial systems. I/O pins support up to 25 mA sink/source drive current.

2. Integrated Peripherals

Analog Peripherals

• 16-channel 12-bit ADC with maximum 1 MSPS sampling rate
• Supports continuous sampling in sleep mode and automatic multi-sequence conversion
• ADC synchronization trigger from PWM modules for closed-loop motor control systems

Timing & Control Peripherals

• 8-channel 16-bit PWM generator with complementary output, programmable dead-time control, edge-aligned and center-aligned modes
• Multiple 16-bit general-purpose timers and quadrature encoder interface (QEI) for motor position feedback
• Input capture and output compare modules for pulse measurement and waveform generation

Communication Interfaces

• UART modules with hardware handshake and LIN bus support
• SPI and I2C serial ports for external sensor, memory and peripheral communication
• CAN 2.0B active controller for industrial automotive and factory automation networking

3. Electrical & Environmental Ratings

• Operating temperature range (Grade I): -40°C to +85°C industrial wide temperature range
• Full voltage brown-out detection and programmable power-on reset (POR)
• Multiple low-power modes including idle, doze and deep sleep to reduce power consumption for battery-operated devices

4. Package Details

• Package type: 80-pin TQFP surface mount (PF suffix)
• Tray packaging as standard; tape-and-reel versions available for high-volume SMT production
• Fully RoHS compliant, lead-free construction

Typische Anwendungen

• BLDC / PMSM industrial motor drives and servo control systems
• Power supply digital control (SMPS, UPS, battery chargers)
• Industrial signal acquisition and precision analog measurement equipment
• Automotive auxiliary control modules and off-highway machinery controllers
• Audio processing, vibration monitoring and FFT-based vibration analyzers
• Factory automation PLC auxiliary control and distributed IO units
• Portable test & measurement instruments with real-time signal processing