XCKU3P-L1FFVB676I

제조업체: 자일링스
로직 셀: 3,780,000
로직 슬라이스: 590,000
임베디드 RAM(eRAM): 81,360Kb(2,260 × 36Kb 블록 RAM)
최대 사용자 I/O: 350
패키지: FFVB676(플립칩 BGA)
속도 등급: -1L
작동 온도: 산업용(-40°C ~ +100°C)

메시지 보내기

    사양

    모델 P/N 시리즈 실험실/CLBS 수 속도 등급 논리 요소/셀 수 총 램 비트 I/O 수 전압 - 공급 마운팅 유형 작동 온도 패키지 / 케이스 공급업체 디바이스 패키지
    XCKU3P-L1FFVB676I 킨텍스® 울트라스케일+ 20,34 0,00 355,950 LE 31,641,600비트 272 0.850 V 표면 실장 -40°C - +100°C FCBGA-676 676-FCBGA(27×27)

    Part Number Full Definition

    This is AMD Xilinx Kintex UltraScale+ low-power FPGA built on 16nm FinFET process, optimized for ultra-low static power embedded applications.
    1. XCKU3P: Entry mid-range device of Kintex UltraScale+ series with integrated UltraRAM large-capacity on-chip memory
    2. L1: Low-power optimized speed grade 1 (LI). Supports dual core voltage operation: 0.85V for standard timing, or 0.72V for maximum power saving with reduced operating frequency; lowest power consumption tier for this chip model
    3. FFVB676: 676-ball flip-chip FCBGA compact package, die size 27mm × 27mm, ball pitch 1.0mm
    4. I: Industrial temperature grade, junction temperature operating range: -40°C ~ +100°C

    On-Chip Core Hardware Resources

    Logic & DSP Arithmetic Units

    • Total System Logic Cells: 356,000
    • Total LUTs: 163,000
    • Total Flip-Flops: 325,000
    • DSP48E2 dedicated arithmetic slices: 1368 units

      Applied for digital filtering, FFT computation, wireless baseband preprocessing, lightweight image algorithm acceleration and small matrix calculations

    내장 메모리 리소스

    • Block RAM total capacity: 12.7 Mb
    • UltraRAM dedicated large memory: 13.5 Mb (unique advantage of P-series chips, ideal for frame buffer, deep data buffering)
    • Distributed RAM (LUT-based): 4.7 Mb for ultra-low latency temporary cache

    Clock Management Subsystem

    4 Clock Management Tiles (CMT) integrated, each containing MMCM + PLL modules. Realizes clock multiplication/division, arbitrary phase shifting and jitter suppression to satisfy multi-clock domain system timing demands

    High-Speed Serial Transceivers & General I/O

    • 8-channel GTH high-speed differential transceivers, maximum single lane rate: 16.375 Gbps

      Supported protocols: PCIe Gen3, JESD204B/C, 10G Ethernet, Aurora serial transmission

    • Available user configurable I/O pins: 280

      Includes HR wide-voltage I/O banks and HP high-performance I/O banks; compatible with LVCMOS, LVDS, HSTL, SSTL and mainstream differential signal standards

    • Built-in SYSMON system monitor: real-time detection of chip junction temperature, internal power rail voltages and external analog input signals

    전원 공급 장치 사양

    • Standard core voltage: 0.85 V
    • Low-power mode core voltage: 0.72 V (greatly cuts static & dynamic power consumption, timing performance downgraded to L1 baseline level)

      Independent power domains assigned for core logic, UltraRAM, Block RAM, transceivers and I/O banks

      Typical total power consumption: 7W ~ 26W; passive heat dissipation is available for compact portable embedded hardware

    포장 및 SMT 조립 요건

    • Package: 676-pin flip-chip FCBGA ball grid array
    • Moisture Sensitivity Level: MSL4; all reflow soldering must be finished within 72 hours after vacuum packaging unsealed
    • Fully lead-free, RoHS3 & REACH compliant
    • Delivered in anti-static trays for automated industrial PCB mass production

    Environmental & Reliability Features

    Stable continuous operation under wide temperature swings and strong electromagnetic interference industrial environments.

    Supports 256-bit AES bitstream encryption for IP protection, SEU single-event upset radiation correction, partial dynamic reconfiguration; tailored for battery-powered portable devices, vehicle electronics and airborne lightweight terminals requiring long runtime and high stability.

    일반적인 애플리케이션 시나리오

    1. Portable software-defined radio, handheld wireless signal transceiving and baseband processing modules
    2. Battery-powered multi-channel data recorders, vibration monitoring and portable precision measuring instruments
    3. Miniature airborne short-range radar front-end echo signal acquisition & processing boards
    4. Vehicle-mounted peripheral control units, in-vehicle low-power video preprocessing terminals
    5. Compact embedded machine vision inspection equipment for field industrial use
    6. Low-power PCIe high-speed data acquisition cards and custom industrial SOM core boards