| MODEL P / N | SERI | JUMLAH LABORATORIUM/CLBS | TINGKAT KECEPATAN | JUMLAH ELEMEN / SEL LOGIKA | TOTAL BIT RAM | JUMLAH I / O | TEGANGAN - PASOKAN | JENIS PEMASANGAN | SUHU PENGOPERASIAN | PAKET / KASUS | PAKET PERANGKAT PEMASOK |
|---|---|---|---|---|---|---|---|---|---|---|---|
| XCKU3P-L1FFVB676I | Kintex® UltraScale+ | 20,34 | 0,00 | 355.950 LE | 31.641.600 bit | 272 | 0.850 V | Pemasangan di Permukaan | -40 ° C - +100 ° C | FCBGA-676 | 676-FCBGA (27×27) |
XCKU3P-L1FFVB676I
Produsen: Xilinx
Sel Logika: 3,780,000
Irisan Logika: 590,000
RAM tertanam (eRAM): 81.360 Kb (2.260 × 36 Kb Blok RAM)
I/O Pengguna Maksimum: 350
Paket: FFVB676 (Flip-Chip BGA)
Tingkat Kecepatan: -1L
Suhu Pengoperasian: Industri (-40°C hingga +100°C)
Spesifikasi
Part Number Full Definition
This is AMD Xilinx Kintex UltraScale+ low-power FPGA built on 16nm FinFET process, optimized for ultra-low static power embedded applications.
- XCKU3P: Entry mid-range device of Kintex UltraScale+ series with integrated UltraRAM large-capacity on-chip memory
- L1: Low-power optimized speed grade 1 (LI). Supports dual core voltage operation: 0.85V for standard timing, or 0.72V for maximum power saving with reduced operating frequency; lowest power consumption tier for this chip model
- FFVB676: 676-ball flip-chip FCBGA compact package, die size 27mm × 27mm, ball pitch 1.0mm
- I: Industrial temperature grade, junction temperature operating range: -40°C ~ +100°C
On-Chip Core Hardware Resources
Logic & DSP Arithmetic Units
- Total System Logic Cells: 356,000
- Total LUTs: 163,000
- Total Flip-Flops: 325,000
- DSP48E2 dedicated arithmetic slices: 1368 units
Applied for digital filtering, FFT computation, wireless baseband preprocessing, lightweight image algorithm acceleration and small matrix calculations
Sumber Daya Memori Terintegrasi
- Block RAM total capacity: 12.7 Mb
- UltraRAM dedicated large memory: 13.5 Mb (unique advantage of P-series chips, ideal for frame buffer, deep data buffering)
- Distributed RAM (LUT-based): 4.7 Mb for ultra-low latency temporary cache
Clock Management Subsystem
4 Clock Management Tiles (CMT) integrated, each containing MMCM + PLL modules. Realizes clock multiplication/division, arbitrary phase shifting and jitter suppression to satisfy multi-clock domain system timing demands
Transceiver Serial Berkecepatan Tinggi & I/O Umum
- 8-channel GTH high-speed differential transceivers, maximum single lane rate: 16.375 Gbps
Supported protocols: PCIe Gen3, JESD204B/C, 10G Ethernet, Aurora serial transmission
- Available user configurable I/O pins: 280
Includes HR wide-voltage I/O banks and HP high-performance I/O banks; compatible with LVCMOS, LVDS, HSTL, SSTL and mainstream differential signal standards
- Built-in SYSMON system monitor: real-time detection of chip junction temperature, internal power rail voltages and external analog input signals
Spesifikasi Catu Daya
- Standard core voltage: 0.85 V
- Low-power mode core voltage: 0.72 V (greatly cuts static & dynamic power consumption, timing performance downgraded to L1 baseline level)
Independent power domains assigned for core logic, UltraRAM, Block RAM, transceivers and I/O banks
Typical total power consumption: 7W ~ 26W; passive heat dissipation is available for compact portable embedded hardware
Persyaratan Pengemasan & Perakitan SMT
- Kemasan: FCBGA (Ball Grid Array) tipe flip-chip 676-pin
- Moisture Sensitivity Level: MSL4; all reflow soldering must be finished within 72 hours after vacuum packaging unsealed
- Fully lead-free, RoHS3 & REACH compliant
- Delivered in anti-static trays for automated industrial PCB mass production
Environmental & Reliability Features
Stable continuous operation under wide temperature swings and strong electromagnetic interference industrial environments.
Supports 256-bit AES bitstream encryption for IP protection, SEU single-event upset radiation correction, partial dynamic reconfiguration; tailored for battery-powered portable devices, vehicle electronics and airborne lightweight terminals requiring long runtime and high stability.
Skenario Aplikasi Umum
- Portable software-defined radio, handheld wireless signal transceiving and baseband processing modules
- Battery-powered multi-channel data recorders, vibration monitoring and portable precision measuring instruments
- Miniature airborne short-range radar front-end echo signal acquisition & processing boards
- Vehicle-mounted peripheral control units, in-vehicle low-power video preprocessing terminals
- Compact embedded machine vision inspection equipment for field industrial use
- Low-power PCIe high-speed data acquisition cards and custom industrial SOM core boards
