| الطراز P/N | السلسلة | عدد المعامل/المختبرات | درجة السرعة | عدد العناصر/الخلايا المنطقية | إجمالي بتات ذاكرة الوصول العشوائي (RAM) | عدد الإدخال/الإخراج | الجهد - الإمداد | نوع التركيب | درجة حرارة التشغيل | العبوة / العلبة | حزمة جهاز المورد |
|---|---|---|---|---|---|---|---|---|---|---|---|
| xc7z035-2ffg900c | Zynq-7000 SoC | 42,98 | -2,00 | 275,000 جنيه مصري | 17600000 | 0 | 1.0 V | SMD/SMT | تجاري (0 درجة مئوية ... 85 درجة مئوية) | FCBGA-900 | FCBGA-900 |
xc7z035-2ffg900c
الشركة المصنعة: زيلينكس
الخلايا المنطقية: 275,000
شرائح المنطق: 42,900
ذاكرة الوصول العشوائي المدمجة (eRAM): 17,280 كيلو بايت (480 × 36 كيلو بايت من ذاكرة الوصول العشوائي المجمعة)
الحد الأقصى لإدخال/إخراج المستخدم: 300
الحزمة: FFG900 (Flip-Chip BGA)
درجة السرعة: -2
درجة حرارة التشغيل: تجاري (0 درجة مئوية إلى +85 درجة مئوية)
المواصفات
Part Number Decoding
This is Xilinx Zynq-7000 All Programmable SoC based on 28nm process, integrating dual-core ARM Cortex-A9 processor and large-scale Artix-7 FPGA logic resources, oriented to high-performance embedded vision, multi-channel data acquisition and industrial high-speed control systems.
- XC7Z035: High-end model of Zynq-7000 series
- -2: Speed Grade 2, enhanced timing performance with sufficient margin for high-frequency circuit design
- FFG900: 900-ball FCBGA flip-chip package
- C: Commercial temperature grade, junction temperature operating range: 0°C ~ +85°C
Complete On-Chip Hardware Architecture
1. Processing System (PS: ARM Processor Part)
- Dual-core ARM Cortex-A9 processors, maximum operating frequency up to 1GHz
- Each core equipped with independent 32KB instruction cache + 32KB data cache; 512KB shared L2 cache
- Built-in NEON SIMD floating-point arithmetic accelerator for multimedia decoding, signal calculation acceleration
- Abundant standard peripherals: Dual Gigabit Ethernet, USB 2.0 OTG, SD/MMC, CAN bus, UART, SPI, I2C, GPIO
- Supports secure boot mechanism to protect system startup security
2. Programmable Logic (PL: FPGA Part, Artix-7 Architecture)
- Total Logic Cells: 277,760
- DSP48E1 dedicated arithmetic blocks: 900 units, applicable to FFT operation, digital filtering, multi-channel image algorithm acceleration and matrix calculation
- Total Block RAM capacity: 17.0 Mb
- Multiple MMCM+PLL clock management modules, capable of generating multiple groups of clocks and suppressing clock jitter
- No built-in high-speed serial transceivers inside the chip
3. I/O Resources & On-Chip Monitoring Module
- Total available user configurable I/O pins: 500
- I/O banks support adjustable voltage ranging from 1.2V to 3.3V, compatible with LVCMOS, LVDS and various differential signal standards
- Embedded dual-channel 12-bit XADC analog monitoring unit: real-time collection of chip internal temperature, power supply voltage and external analog input signals
مواصفات مصدر الطاقة
الجهد الاسمي للمنطق الأساسي: 1.0 فولت
Independent power domains are set for processor subsystem and programmable logic respectively.
Typical overall power consumption: 12W ~ 32W, heat sink cooling is required for long-term full-load operation
متطلبات التغليف وتجميع المكونات الإلكترونية (SMT)
- Package: 900-pin flip-chip FCBGA ball grid array
- Moisture Sensitivity Level: MSL3; all reflow soldering work must be finished within 168 hours after vacuum packaging is unsealed
- Lead-free packaging, fully compliant with RoHS environmental specifications
- Delivered in anti-static trays for automated PCB mass production
الخصائص البيئية وخصائص الموثوقية
Only suitable for stable indoor commercial and laboratory environments, cannot adapt to outdoor extreme temperature industrial scenarios.
With bitstream encryption protection and SEU error detection functions, it can operate stably for a long time in indoor industrial automation equipment, commercial vision terminals and desktop measurement instruments.
سيناريوهات التطبيق النموذجية
- Multi-axis high-precision industrial motion controllers, factory production line core control units
- Multi-camera synchronous embedded machine vision inspection platforms, industrial high-speed image processing terminals
- Multi-channel high-speed data recorders, vibration and signal monitoring analytical instruments
- Medical indoor diagnostic equipment main control and medical image preprocessing modules
- Intelligent surveillance multi-channel video decoding and real-time analysis nodes
- High-performance embedded secondary development core boards and algorithm verification platforms
