Технические характеристики
This is a compact USB 2.0 full-speed to UART bridge controller from Silicon Labs, upgraded from CP2102 with extra general-purpose GPIO pins, designed to convert USB signals to standard asynchronous serial communication with minimal peripheral components.
Определение номера детали
CP2103 stands for the upgraded USB-to-UART bridge chip model with extended GPIO functions. GM indicates single loose-piece 28-pin QFN packaging. GMR refers to tape-and-reel packaging for automatic SMT placement on production lines.
Core Function and Electrical Specifications
The chip embeds complete USB transceiver, internal oscillator circuit and power-on reset module, requiring no external crystal oscillator and matching resistors for USB circuits. It carries 1024-byte user programmable EEPROM, which can be written with customized VID, PID, product information and serial number through USB channel during production. UART interface supports baud rate up to 2Mbps, equipped with 640-byte transmit FIFO buffer and 576-byte receive FIFO buffer, compatible with hardware flow control and software XON/XOFF handshake protocol. Full set of modem control signal pins are reserved for traditional serial equipment docking. Compared with CP2102, four independent 3.3V logic GPIO pins are added for external indicator lamp driving, switch input and simple peripheral control. Operating supply voltage ranges from 3.0V to 3.6V. Suspend low-power mode is built in to cut power consumption for battery-powered portable devices. The chip supports virtual COM port driver on mainstream operating systems to realize plug-and-play serial communication.
Packaging and Assembly Requirements
Both versions adopt 28-pin exposed pad QFN surface mount package with dimension 5mm×5mm. This component belongs to MSL1 moisture sensitive level, with unlimited shelf life after vacuum package opening without strict soldering time limit. CP2103-GM is supplied in bulk single unit packaging, while CP2103-GMR is standard reel packaging to match feeding of fully automatic patch equipment.
Экологические стандарты и стандарты соблюдения нормативных требований
Operating temperature range covers -40℃ to +85℃, applicable to industrial control equipment, field monitoring terminals and consumer electronic devices. The whole product is lead-free and complies with universal environmental restriction regulations. High integration effectively reduces PCB layout area and total BOM quantity of serial conversion modules.
Типичные области применения
Single-chip and embedded mainboard program download and debugging serial ports USB to RS232/RS485 adapter modules and industrial serial communication conversion equipment POS terminals, access control systems and intelligent cabinet data transmission channels Environmental monitoring sensors, data acquisition nodes and wired signal uploading equipment Instrumentation, handheld testing devices and medical portable equipment upper computer communication interface
LXB Semicon supplies original Silicon Labs CP2103-GM and CP2103-GMR USB to serial bridge IC
