MT25QL128ABA1EW9‑0SIT

BIZE MESAJ GÖNDERIN

    Teknik Özellikler

    MT25QL128ABA1EW9‑0SIT is Micron’s industrial-grade 128Mb Multi-I/O SPI Serial NOR Flash, designed for embedded firmware storage, FPGA configuration, parameter logging and industrial non-volatile memory applicationsMicron Technology.

    Soneklerin Ayrıntılı İncelemesi

    • MT25QL: Micron 3V Quad SPI NOR Flash product family
    • 128: 128 Megabit memory density
    • ABA: Die revision with dedicated hardware /RESET pin
    • EW9: Wafer & process variant code
    • 0SIT: Industrial temperature grade (-40°C ~ +85°C), 8-WPDFN EP package, tape-and-reel bulk shipping
    • Full tape reel order code: MT25QL128ABA1EW9‑0SIT-TR

    1. Memory Architecture & Density Specs

    • Total capacity: 128Mb = 16 MB (32M × 4-bit / 16M × 8-bit organization)
    • Page buffer size: 256 bytes; typical page program time: 2.8 ms, max 8 ms
    • Flexible erase granularity:
      • Uniform main sector: 64 KB
      • Small sub-sectors: 4 KB / 32 KB for partial data updates
      • Full bulk chip erase supported
    • Independent 64-byte factory OTP (One-Time Programmable) region: stores unique serial ID, MAC address, calibration keys, permanently lockable after writing
    • Endurance rating: Min 100,000 program/erase cycles per sector
    • Data retention: Minimum 20 years continuous storage at 85°C ambient temperature

    2. Multi-Mode High-Speed SPI Interface

    Fully compatible with Single SPI, Dual I/O SPI, Quad I/O SPI, supports both STR (Single Transfer Rate) and DTR (Double Transfer Rate) modes:
    • Max STR clock: 133 MHz
    • Max DTR clock: 90 MHz
    • Peak Quad SPI read throughput up to 90 MB/s, enables XIP (Execute-In-Place) direct firmware execution without RAM shadowing
    • Dedicated hardware pins: /CS, SCK, IO0~IO3, /WP, /HOLD, /RESET for simplified PCB layout
    • Program/erase suspend & resume function: allows urgent read operations to interrupt flash programming/erasing tasks
    • Built-in software reset + hardware /RESET pin for reliable system recovery

    3. Electrical Operating Characteristics

    • Single supply voltage range: 2.7 V ~ 3.6 V (standard 3.3 V industrial logic rail)
    • Typical read operating current: 15 mA
    • Standby leakage current < 10 μA; deep power-down mode with sub-microamp draw for battery-powered IoT terminals
    • Integrated high-voltage charge pump inside die; no external high-voltage rail required for programming or erasing

    4. Multi-Layer Security & Write Protection

    1. Hardware lock via /WP pin to block all program/erase operations
    2. Software per-sector lock bits to protect arbitrary memory zones
    3. Global non-volatile lock bit to secure full chip against overwriting
    4. Optional password protection mechanism for advanced OEM data security
    5. Power-fail safeguard logic to avoid corrupted pages during unexpected voltage drop
    6. Industrial-grade ESD protection on all signal pins to resist harsh factory wiring interference

    5. Environmental & Packaging Ratings

    • Operating temperature grade: Industrial -40°C to +85°C continuous operation
    • Moisture Sensitivity Level: MSL 3 (168-hour floor life after package opening before reflow soldering)
    • Fully EU RoHS 3 lead-free, halogen-free and REACH SVHC compliant green packaging
    • Package type: 8-pin WPDFN with exposed thermal pad
    • Package dimension: 8.0 mm × 6.0 mm × 0.8 mm ultra-thin compact footprint
    • Tape-and-reel quantity: 4000 units per reel for automated high-volume SMT assembly

    Tipik Uygulamalar

    • FPGA/SoC configuration flash for industrial PLC, servo drives and motion control hardware
    • Embedded MCU firmware storage for gateway, sensor node and communication modules
    • Wireless IoT sensor nodes, smart home battery-powered monitoring terminals
    • Network switches, Ethernet controllers bootloader and persistent parameter storage
    • Portable medical diagnostic instruments requiring long-term log retention
    • Automotive auxiliary ECU, cabin infotainment and telematics configuration memory
    • Digital signage, POS payment terminals and handheld test & measurement equipment
    • Audio DSP boards, MIDI controllers and embedded Linux single-board computer boot flash
    LXB Semicon supplies original Micron MT25QL128ABA1EW9‑0SIT industrial-grade 16MB Quad SPI Serial NOR Flash memory IC