Teknik Özellikler
GD32F103CBT6 is a mainstream 32-bit general-purpose microcontroller developed by GigaDevice Semiconductor, built around ARM Cortex-M3 core with maximum 108MHz operating frequency. It delivers higher execution efficiency and lower power consumption compared to equivalent Cortex-M3 MCUs on the market, featuring abundant built-in peripherals and pin-compatible alternative to STM32F103C8T6 for cost-sensitive embedded projectsGigaDevice.
👉 It is not high-end GD32F105/F107 series with Ethernet or USB OTG function, nor low-density GD32F101 value-line without CAN/USB. This mid-range LQFP48 model balances memory capacity, communication interfaces and PCB footprint, ideal for industrial control, USB data acquisition and CAN bus networking equipment.
Temel Özellikler
- Cortex-M3 Core & Memory Architecture
- ARM 32-bit Cortex-M3 processor, up to 108MHz clock, zero-wait Flash access, ~1.25 DMIPS/MHz computing performance
- On-chip storage: 128KB Flash program memory + 20KB SRAM data bufferGigaDevice
- Advanced gFlash non-volatile storage technology, high reliability and long flash cycling lifespan
- Rich interrupt controller, supporting nested priority interrupts and hardware debug interface
- Rich Analog & Timer Peripherals
- Dual 12-bit 1MSPS multi-channel ADC (total 10 external analog input channels) for voltage/current sensor samplingGigaDevice
- Timer resources: 3 general-purpose 16-bit GPTMs, 1 advanced 16-bit PWM timer for BLDC motor driving, independent SysTick, watchdog timers and RTC calendar module
- Support complementary PWM output, dead zone insertion, encoder capture and input signal pulse counting
- Complete Multi-Protocol Communication Interfaces
- 3 x USART serial ports for RS232/RS485 Modbus communication
- 2 x I2C, 2 x SPI for FRAM, EEPROM, sensor and display peripheral expansion
- 1 x CAN 2.0B controller for industrial field bus and automotive signal transmission
- Built-in USB 2.0 Full-Speed device controller for USB serial, data logger and portable instrument interfaceGigaDevice
- Electrical & Low-Power Design
- Operating supply voltage: 2.6V ~ 3.6V (nominal 3.3V), most GPIO pins 5V tolerant
- Multiple low-power modes: Sleep, Deep-sleep and Standby; standby leakage current down to 1.5μA for battery-powered equipment
- Built-in internal high-speed RC oscillator, optional external HSE crystal for high-precision clock
- Integrated power-on reset (POR), voltage detection circuit to simplify peripheral power circuit design
- Package & Industrial Specifications
- Package: 48-pin LQFP surface mount (7mm×7mm), tape-and-reel bulk packaging for mass SMT production
- Operating temperature grade: -40°C ~ +85°C industrial wide temperature range
- Full pinout compatibility with STM32F103C8T6, easy firmware migration with minor code adjustment
- RoHS lead-free compliant, complete official GD32 standard library and rich open-source development resources
Tipik Uygulamalar
Industrial PLC control nodes, servo auxiliary controller and frequency converter peripheral logic
CAN bus industrial sensor networks, Modbus RS485 data acquisition terminals
USB portable test & measurement instruments, multi-channel ADC data loggers
BLDC small motor controllers, fan and pump variable speed drive systems
Smart power monitoring meters, photovoltaic small control modules
Handheld medical diagnostic devices and wearable health monitoring hardware
Consumer smart home controllers, touch panel and LED lighting drive boards
Automotive auxiliary ECU, electric bike control and vehicle signal gateway
Education embedded development boards and electronic experiment platforms
Low-cost USB serial adapters, barcode scanner and access control mainboard
LXB Semicon supplies original GigaDevice GD32F103CBT6 Cortex-M3 32-bit MCU IC
