PIC16F886-I/SO

Hãy gửi cho chúng tôi một tin nhắn.

    Thông số kỹ thuật

    PIC16F886-I/SO is an 8-bit Flash CMOS microcontroller from Microchip’s PIC16F enhanced series with nanoWatt low-power technology. Suffix breakdown: I = industrial temperature grade, SO = 28-pin narrow SOIC surface-mount package.

    1. Thông số kỹ thuật về bộ vi xử lý và bộ nhớ

    Kiến trúc CPU

    • 8-bit RISC core with only 35 single-word instructions
    • Maximum operating clock speed: 20 MHz (5 MIPS execution)
    • Precision factory-calibrated internal oscillator (±1% accuracy), tunable from 31 kHz to 8 MHz
    • Supports clock switching on-the-fly for dynamic power optimization

    Phân bổ bộ nhớ

    • Program Flash: 14 KB (8K × 14-bit words), 100,000 typical erase/write cycles
    • Data SRAM: 368 bytes
    • On-chip Data EEPROM: 256 bytes, up to 1,000,000 erase/write cycles; data retention >40 years
    • Full self-programmable under software control, with programmable code read protectionMicrochip Technology

    2. Thiết bị ngoại vi tích hợp

    Mô-đun tương tự

    • 11-channel 10-bit ADC with multi-sequence automatic conversion
    • Dual high-speed analog comparators with SR latch mode
    • Programmable internal voltage reference (CVREF), fixed 0.6V reference option
    • All analog pins feature overvoltage input protection for industrial wiring noise immunityMicrochip Technology

    Control & Timer Peripherals

    • 1 × Standard CCP (Capture/Compare/PWM) module
    • 1 × Enhanced ECCP module for high-resolution complementary PWM with dead-time control
    • Multiple 8-bit / 16-bit general-purpose timers + independent watchdog timer
    • Brown-out reset (BOR) and programmable power-on reset (POR) circuit

    Các giao diện truyền thông nối tiếp

    • MSSP synchronous serial port, configurable as SPI (3-wire) or I²C (2-wire) master/slave
    • EUSART enhanced UART with hardware handshaking and LIN bus support
    • Supports multi-device daisy-chain expansion for sensor networks

    Các tính năng I/O và nguồn điện

    • 24 general-purpose digital I/O pins with individual pull-up resistors
    • Wide supply voltage range: 2.0 V ~ 5.5 V, compatible with 3.3V and 5V industrial systems
    • Multiple low-power nanoWatt modes: Sleep, Idle, Doze to minimize battery drain
    • Crystal failure detection for safety-critical continuous monitoring systems

    3. Thông số kỹ thuật về điện và môi trường

    • Phạm vi nhiệt độ hoạt động (Cấp I): -40°C đến +85°C – phạm vi nhiệt độ rộng dành cho công nghiệp
    • MSL 1 moisture sensitivity level, unlimited floor life without dry-bag storage
    • Tuân thủ hoàn toàn các tiêu chuẩn RoHS về không chứa chì và không chứa halogen
    • Tray standard packaging; tape-and-reel variant PIC16F886T-I/SO available for mass SMT assembly

    4. Thông tin chi tiết về gói sản phẩm

    • Package: 28-pin narrow-body SOIC (7.50mm width surface mount)
    • Surface-mount design optimized for compact PCB layouts in small industrial control boards

    Ứng dụng điển hình

    • Low-cost industrial sensor signal acquisition & analog monitoring modules
    • Household appliance control boards (heating, lighting, motor drive)
    • Portable battery-powered handheld test & measurement instruments
    • Small solenoid, fan and DC motor closed-loop PWM control
    • Building automation access control, temperature & humidity sensor nodes
    • Consumer electronics battery charging management circuits
    • Automotive auxiliary lighting, window and small actuator controllers
    • Educational embedded development and prototype demo systems
    LXB Semicon supplies original Microchip PIC16F886-I/SO industrial-grade 8-bit Flash microcontroller