xc4vlx25-10sfg363c

XC4VLX25-10SFG363C: 90nm Virtex-4 LX in the Compact SF363 Footprint

إن xc4vlx25-10sfg363c is a logic-optimized FPGA tailored for high-volume, space-sensitive applications. While the Virtex-4 family is known for its multi-platform approach, the LX25 in the SFG363 package focuses on delivering 24,192 logic cells with a balanced I/O count, making it a frequent choice for localized control logic, interface bridging, and protocol conversion in medical and communications hardware.

إن -10 درجات السرعة provides the baseline performance for the 90nm architecture, offering a cost-effective solution for designs that do not require the aggressive timing margins of the -11 or -12 bins.

المواصفات الأساسية التقنية

• الخلايا المنطقية: 24,192

• مصفوفة CLB: 48 x 72 (Max Logic Density for the small-form package)

• إجمالي كتلة ذاكرة الوصول العشوائي (RAM): 1,296 كيلو بايت

• شرائح DSP48 48

• الحد الأقصى لإدخال/إخراج المستخدم: 240

• الحزمة: SFG363 (17mm x 17mm, 0.8mm Pitch, RoHS Compliant)

• درجة السرعة: -10

• درجة الحرارة: Commercial (0°C to +85°C $T_j$)

Design & Integration Notes

1. Footprint Efficiency vs. I/O Access

The SFG363 package is roughly 60% smaller by area than the FFG668 variant. However, this comes at the cost of “bonded-out” I/O. With 240 pins available, ensure your pin-assignment (.ucf) does not exceed the physical constraints of this package. If you are migrating a design from a larger Virtex-4 device, you will likely need to re-evaluate your I/O bank assignments.

2. Configuration & Bitstream

This device supports standard configuration modes including Slave Serial, Master Serial, SelectMAP, and JTAG. Given the 24k logic cell density, bitstream sizes are manageable for standard PROM or Flash configurations. Note that the Virtex-4 requires a 1.2V $v_{ccint}$ rail; ensure your power delivery network (PDN) is characterized for the specific switching transients of the LX fabric.

3. Legacy Tooling (ISE 14.7)

As a reminder for teams maintaining older platforms, the XC4VLX25 is غير مدعوم من Xilinx Vivado. You must use the ISE Design Suite. We recommend using the final 14.7 release to ensure all timing models and silicon-specific errata are correctly addressed during synthesis and place-and-route.

مقارنة: XC4VLLX25 SFG363 مقابل FFG668

الأسئلة الشائعة حول الهندسة

Is the SFG363 package lead-free?

Yes, the “G” in the SFG363 suffix indicates a Lead-Free (RoHS compliant) package. If you are repairing older equipment that originally used the leaded “SF363” non-G version, this part is functionally and footprint identical, though you should adjust your reflow profile for lead-free solder.

What is the maximum clock frequency for the -10 speed grade?

While $F_{max}$ depends heavily on your logic levels and routing congestion, the -10 grade typically supports internal global clocking up to 400 MHz. For high-speed I/O interfaces, we recommend checking the DC and Switching Characteristics (DS302) for specific $T_{IOPI}$ timing.

Can I use a -11 speed grade part in place of this -10?

Yes. You can always “upspec” to a faster speed grade (-11 or -12) without changing your bitstream, provided the package and temperature grade match. It is a common strategy for stabilizing legacy systems that have tight timing margins.

Need a quote for verified, traceable stock?

We specialize in the procurement of mature Xilinx silicon for long-term maintenance projects. We provide full visual inspection and date-code verification to ensure your boards stay in the field.

Would you like me to check the availability of specific date codes or provide the mechanical drawing for the SFG363 package?

للتواصل مع LXB Semicon للتوافر والتسعير والدعم الفني.