| الجزء المصنّع | ورقة البيانات | الشركة المصنعة | التصنيف الحالي | نوع المستشعر | وقت الاستجابة | جهد إمداد التيار الكهربائي للتشغيل | نوع الإخراج | درجة حرارة التشغيل | الدقة | الحزمة/الحالة | تيار الإمداد (الحد الأقصى) | الحساسية | الوظيفة |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ACS716KLATR-6BBB-T |  |
أليجرو | ±6 A | تأثير القاعة، الحلقة المفتوحة | ~حوالي 4 ميكرو ثانية | 3 فولت إلى 3.6 فولت | الجهد القياسي النسبي | من -40 درجة مئوية إلى +125 درجة مئوية | ± 2.2 % | 16-منظمة التعاون الإسلامي | 11 مللي أمبير | 100 مللي فولت/ألف | استشعار التيار المتردد/ التيار المستمر |
ACS716KLATR-6BBB-T
الشركة المصنعة: أليجرو ميكروسيستمز
الخلايا المنطقية: مستشعر التيار الخطي ذو التأثير القاعة - IC
شرائح المنطق: عنصر استشعار القاعة مع تكييف الخرج التناظري
ذاكرة الوصول العشوائي المدمجة (eRAM): –
الحزمة: SOIC-8
درجة حرارة التشغيل: -40 درجة مئوية إلى +150 درجة مئوية
المواصفات
ACS716KLATR-6BB-T is an Allegro MicroSystems open-loop galvanically isolated linear Hall-effect current sensor with integrated overcurrent fault detection, designed for precise bidirectional AC and DC current monitoring in compact 3.3V low-power power conversion, motor drive and battery management equipment.
👉 It’s not a low-bandwidth basic current sense chip without fault protection.
👉 It’s a high-speed, high-noise-immunity isolated current sensor with user-configurable overcurrent alarm for space-limited industrial and consumer power systems.
Key Features of ACS716KLATR-6BB-T Current Sensor IC
Power hardware and embedded designers select ACS716KLATR-6BB-T for its compact form factor, fast response and robust high-voltage switching noise suppression:
- ±6 A bidirectional AC/DC current sensing range with fixed 100 mV/A sensitivity
- 2400 Vrms galvanic isolation between primary power track and low-voltage signal circuitry
- Ultra-low 1 mΩ internal primary conductor resistance to reduce power loss and self-heating
- Patented integrated internal shielding suppresses high dv/dt capacitive coupling interference from switching power rails
- 120 kHz wide analog bandwidth with only 4 μs typical signal response time for fast current loop control
- User-adjustable overcurrent fault threshold via VOC pin; fault flag triggers within <2 μs for rapid circuit protection
- Dedicated external filter pin to tune bandwidth and lower measurement noise for low-frequency monitoring tasks
- Single 3 V–3.6 V supply voltage, fully optimized for 3.3V MCU logic circuits, max 11 mA quiescent supply current
- Chopper-stabilized Hall architecture delivers ultra-stable zero-current output voltage and minimal magnetic hysteresis
- Factory pre-trimmed sensitivity and offset voltage to eliminate secondary system calibration steps
- Ratiometric analog output centered at half the supply voltage under zero current condition
- High precision performance: ±0.25% full-scale linearity, ±2.2% total output accuracy at 25°C
- 16-SOIC wide-body surface mount package, tape-and-reel (TR) shipping format for mass SMT assembly
- Extended industrial operating temperature range: -40°C to +125°C
- RoHS 3 compliant lead-free construction, MSL 3 moisture sensitivity rating
التطبيقات النموذجية
Small DC-DC converters, server auxiliary power and portable device power modules
Low-power brushless DC motor drivers and small servo control boards
Lithium battery management systems for consumer electronics and small energy storage packs
Overcurrent protection for industrial compact control modules and PLC peripherals
Smart home power monitoring, USB PD fast charging adapters and power banks
Network communication small switch power supply units
Medical portable diagnostic equipment and low-power analytical instruments
Automotive auxiliary electronic load current detection
LXB Semicon supplies original ACS716KLATR-6BB-T current sensor IC
